scottishgant
MrPLC Member-
Content count
12 -
Joined
-
Last visited
Posts posted by scottishgant
-
-
Following the working I have been doing, I have encountered another problem. I am using CJ1M from Omron and the I will use CPU 315 2DP (siemens) and connect them to Labview using ethernet. However, I tried to use Hyperterminal (or telnet) to test it. Pressing any key, the response becomes always the same: FINS za<$ Between "FINS" and "za" are three [] (squares). Does anyone know what this means? Does anyone know how to establish the connection I need? Can the Siemens plc establish a connection with labview? How? With an OPC server? Thanks. -
Following the working I have been doing, I have encountered another problem. I am using CJ1M from Omron and the I will use CPU 315 2DP (siemens) and connect them to Labview using ethernet. However, I tried to use Hyperterminal (or telnet) to test it. Pressing any key, the response becomes always the same: FINS za<$ Between "FINS" and "za" are three [] (squares). Does anyone know what this means? Does anyone know how to establish the connection I need? Can the Siemens plc establish a connection with labview? How? With an OPC server? Thanks. -
Thanks. I am going to gather the info I need and try OPC. I suppouse OPC works with Siemens as well, right? -
I need the ethernet because the work I am doing is to be implemented in a industrial company and they use this system. I was told about OPC but I do not know how it works. What is it for? Labview does not support cx-p or FINS? -
The problem is that I do not know how to config labview or to write the Labview protocol. -
The CPU I am using is CJ1M CPU12-ETN from Omron. Today I have established the communication between this CPU and the cx-programmer. My problem lies in the labview part. I have been trying but I cannot establish a proper communication. What I need is the program to make it work. After this I will have establish the same connection using the Siemens' CPU I mentioned. -
I am working with the cJ1w-pa202 plc from Omron but then I will have to make the communication using 315 2DP from Siemens. -
Labview works with these plcs, and I have to establish the communication with it. However, it is a bit difficult and I have stopped my work because of this problem. -
Hi! Thanks for your reply. I need help making the program that allows the connection between the plc (Siemans, Omron) and labview by ethernet or the actual thing already made. It is really important and urgent. I have established the connection using RS232 but using labview is another thing. Thank you. -
Hi! I need to establish a communication between a plc and labview using ethernet. I have developed the same communication using RS232, but not with ethernet. Does anyone have the code I need? Can anyone help me, please? Thank you. -
Hi! I need to establish a communication between a plc and labview using ethernet. I have developed the same communication using RS232, but not with ethernet. Does anyone have the code I need? Can anyone help me, please? Thank you.
Siemens S7-300 / Opc Server
in Siemens
Posted