Joris

I don't have the problems anymore.After a few hours trying and installing I have the 2 computers working with the latest software. PC02 I started with CX programmer V7.2 and CX server 3.0. PC01 i did clean the registry until there was no Omron software anymore. After restart i used the latest DVD with CX One V3 EV3. After both installations i had to update the software from the Omron AUTO update site. You must install the next 2 files in this order; 1 - Cmn0810_0301Setup.exe (critical file) 2- Prg0810_0302Setup.exe en After these 2 updates CX programmer was back to normal again. Now i can dial with old programms to our clients without problems. CX-P.EXE 8.0.1.5 and CX-Server 4.0.4.2 (most files) I have written every step in the 2 included text files I solved this problem with assistance of Omron Hoofddorp - The Netherlands We're both glad about this. Good luck OmronUpdatePC01_EN.txt OmronUpdatePc02_EN.txt

Hello, We have the same problem. I did change the version releases the first time with updates (from CX Programmer 7.2). And later I did the same with the new CX One 3.0 release cd's (after i even cleaned my Windows registry). What happens in my situation is that the connection is made (with the other modem) but CX Programmer doesn't do anything. No Alarm, no message nothing. When you try to connect again it tells me that the port is already in use. I also couldn't change the network type. It was light grey coloured and couldn't be changed. We had the problems on 2 seperate Dell desktop PC's (If that does matter????) I switched back to version 7.2 and wait until the problems are solved. Omron helped me correctly but they didn't have the problem. Even not with the (dial in) programms we used and have the problem with.These program were al written with older CX Programmer versions. We're glad to see that we're not the only one with this problem. Good luck.

Thanks, Problem with the IOWR function is that it doesn't work anymore with an CJ cpu plc. I already tried programming it with an EGATR (721) and an ESATR (722) instruction. It is much easier than an CMND instruction. I'm busy with it an i feel i'm on the right direction. Thanks anyway

Does anybody have experience with several V700 HMD11 Tag readers (via DRT1-RS232C2 converter) on DeviceNet?. I'm looking for a programm which can read them by command. It is only reading not writing. I have 14 scanners and every DRT1_RS232C2 does have 2 ports so there are 7 devicenet nodes programmed.The Plc is an Omron CS1H cpu66 (v3) with an CJ1W-DRM21 Devicenet card inserted. Can anybody help me?

Hi PdL I am Sorry, i thought i did found it on the Dutch Omron website. I can't remember how i get this file. I include it in my file. i hope you can use it also CXP6006.ZIP

Jay, we have an update for it, if you have version 6.0.0.0 or 6.0.0.1 you must instal it. I work with version 6.0.0.6 (CXP.exe). It is a bug in the software. You will find it on the Dutch ( Netherlands) Omron website. Even than it is not really solved, when you copy paste different plc's in 1 project you sometimes get the problem back. And when you do this a few times he's gone again.