Shomation
MrPLC Member-
Content count
9 -
Joined
-
Last visited
Posts posted by Shomation
-
-
Dear All,
I have uploaded program from NT631C-V3 4.2 via NT-Transfer Tool
There was no error during upload. Now when I am trying to open the .mmi file in NT Support tool then it is showing error that "This version of the File cannot be Loaded"
can anyone help me what is the solution?
waiting
Thanks
-
waiting for support please
-
Dear All,
Currently, all DIP switches are OFF. If I turn DIP Switch # 5 ON, should I restart the PLC or not needed?
Some says SYSMAC protocol should be selected and some says Toolbus, I am not sure which one is correct
-
I have tried Auto-online option but not successful
waiting for reply
Thanks
Shoaib
-
Dear All,
I am trying to connect the CJ1M PLC with PORT connector (DB9) to PC. I have made the cable according to the XW2Z-200S-V diagram but when I try to connect to PLC, shows communication error
can anyone help what may be the reason?
waiting for reply
Thanks
-
Dear All,
Omron NQ HMI was installed with CJ1M CPU. Now I am trying to replace the HMI with weintek MT8071iP but HMI showing communication problem.
I have omron HMI NQ program and set protocol settings as was set in NQ
please see the attachment. Please suggest what may be the reason?
waiting for reply
Thanks
Shoaib
-
Hello Quant,
Thanks for reply
please confirm If I want to place the module in some other slot, do I need to make changes in hardware configuration of the PLC program? or I can just place the module in any slot of the rack?
-
Dear All,
TSX AEY414 was installed on a machine and was working fine. suddenly module becomes faulty and its ERR LED tuned ON
we replace the new same module and the new module was showing the same error
we replace the 3rd new module , this worked for 8-12 hours fine. now the situation is that RUN LED is on of the module, but values on HMI display remains 0.0
can anyone help me please?
waiting for reply
Thanks
NT631C file not opening
in Other Omron Software
Posted
hello
can anyone help me how can I add NT631C V4.2 in PT list as it is missing and I think the problem is that only 4.1 version is there in PT list
I have tried adding registry files but thats not work for me
any other suggestions and solutions please