Posted 21 Apr 2021 Dear All, TSX AEY414 was installed on a machine and was working fine. suddenly module becomes faulty and its ERR LED tuned ON we replace the new same module and the new module was showing the same error we replace the 3rd new module , this worked for 8-12 hours fine. now the situation is that RUN LED is on of the module, but values on HMI display remains 0.0 can anyone help me please? waiting for reply Thanks Share this post Link to post Share on other sites
Posted 21 Apr 2021 Hello Shomation, try to check if your module works in other rack or other slot of the rack - may be the slot of your rack just defect. Share this post Link to post Share on other sites
Posted 21 Apr 2021 Hello Quant, Thanks for reply please confirm If I want to place the module in some other slot, do I need to make changes in hardware configuration of the PLC program? or I can just place the module in any slot of the rack? Share this post Link to post Share on other sites
Posted 25 May 2021 If you place it in another slot you will 1st need to change the hardware config in the plc software. Which will require a download to the plc again Share this post Link to post Share on other sites