toTAZ

MrPLC Member
 View profile  See their activity

  • Content count

    37

  • Joined

  • Last visited

Posts posted by toTAZ

  5. Posted

    i usually use cj1m series plc. for upgrading plc programs i use cf card. is there any other program for transfering compiled obj file without cxprogrammer. command line or with interface its doesnt matter. if you know protocol also i can write. thanks

  7. Posted

    thanks anonymous , bit 9 is on, "Memory Card error - Is the card installed correctly / is the correct file on the card?" i think its not about installation, i can see all files in CF card with cx-programmer. this attachment show which files is loaded in card. is there any other type file, or settings, (note : "prohibit program overwrite..." or other option is disabled)

  8. Posted

    hi, i have a cj1m-cpu21, i try to load program with compact flash. i have buy a 64 mb cf and format it fat16. then load autoexec.obj and other project file in cf. i plug cf and switch 2 and reboot plc, but eccours memory error 0x80f1. where is the problem sorry for my terrible english

  10. Posted

    i use cx programmer 5.0.. sometimes adrees reference tool get lost. i click shourt cut or use alt+4 but i cant see it. i delete *.opt files but it didnt work then every times i unistall all program and delete all registry settings and install it again. is it about my configuration or bug

  14. Posted · Edited by toTAZ

    hi iam again icant find k3sc-10 usb-rs485 convertors usb driver. i look omron web site and goggle but icouldnt find it. if you have driver could you sen me or upload download section thanks

  15. Posted

    Hi everyone :) i wantto use 3 omron k3gn panelmeter on system, and using with rs485 can i collect display data this 3 panelmeter (like figure 2) in manual (page 123) show only one k3gn (figure 1) if this is possible, how must i do it, using with pmcr command ?

  16. Posted

    hi, we want to mount panel pc(has a 20 gb 5400rpm notebook harddrive) on the rack, but in this panel there is 3g3mv2 2 phase 2.2 kw invertor. icant found any warn, but ithink its maybe hazardous for harddisk.. what do you think. (distance is 20~30 cm) sorry, my english may (not may,certainly) bad

  18. Posted

    actually i want to mount 20 analog input node and a analog output.. and send these value via rf modem. 1- maximum how many analog i/o can be mounted to CQM1hcpu21 plc.. 2- is there any embedded omron rf modem.. 3- which type plc more suitble for this job ? thanks

  21. Posted

    my programs are used in inds. field since 96, and there isnot any problem... i think delphi +turbo power async pro comport or delphi + serial comport best choice for comminication. the Most populer (and perfect)2 open source free component i think mscomm has lots of problems. it crash and its some times freeze..

  24. Posted

    thanks Jay i know i'll possessor Cif-11 but there isnt any package information.. for exam. this is for cqm1h after @ first and second characters are NODENO but how can i change it on plc.. or this is true way of reach DM area.. i thought i send first plc @01RD000000010XXcr and it will send response @01RD... and next @02RD000000010XXcr and it will send response @02RD... isnt it true

  25. Posted

    once upon,, but it was very slow than this example :) idont know why but its catch only 40-50 dm area in one second, but this can 300-500 dm area in one second (not in this example :) ) but now i want to use more than one plc.. (at least 3-5 plc) how can i use rs422.. i found this hardware connection for cpm but i cant found package information.. thanks