30 files
-
PAROCK1 for HMI/SCADA
By Scadadoctor
Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc. It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems). For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices. (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc. All the MB public/native function codes are supported. 32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.
Features
-Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support
Requirements
-Rockwell/AB-CLgx processor with v16 or later. Contact PCI for earlier versions.
-If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities
-TCP/IP Interface Modules from Rockwell/AB supported, are:
-1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later
-1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later
-1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later
-1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later
-1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later
-1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later
Other Related Services/Items
-Custom PLC Add-on instructions building
-PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers
-Custom development, Technology Transfer Services
-Other Non-AB communication drivers for serial or TCP
-Full control system integration, training, architecture design
This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
For More Info
Overview of Parijat Drivers: Click here
Additional supporting Info about Parijat Drivers:Click here
Complete Related Driver options: Click here
7 downloads
Updated
-
Kloeckner Moeller PLC for HMI/SCADA
By Scadadoctor
Features
-Supports all Moeller PLC’s using EasyComm Protocol or any other device which uses EasyCommprotocol .
-Serail& TCP mode support
-Can Connect to all 8 Net IDs
-Performance – 2.2 GHz Dual Core - 10 words: 15msecs (avg)
Memory Types Support
-P buttons
-EasyNet inputs
-EasyNet outputs
-Analog inputs base unit
-Analog output, base unit
-MDx, 1 to 20 double word marker
-xRN1…xRN32, easyNet Receive data
-xSN1…xSN32, easyNet Send data
-ID1…ID16, Diagnostic bits
-ID17…ID32, Additional diagnostic bits for MFD-Titan
-LE1…LE3, Programmable LEDs for MFD-Titan
-N1…N16, Additional Bit marker for easy500/700
This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
For More Info
Overview of Parijat Drivers: Click here
Additional supporting Info about Parijat Drivers:Click here
Complete Related Driver options: Click here
10 downloads
Updated
-
Thompson Scale 4693, TSC350 Driver for HMI/SCADA
By Scadadoctor
With ParTSCComm driver you can communicate via serial or Ethernet with Thompson Scale Checkweigher Systems Models 4693 and TSC-350, emulating the Stat Pak-PC Data Exchanges.
Features
Customer_Name Product_Desc High_Reject_Limit High_Pass_Limit Target_Weight Low_Pass_Limit Low_Reject_Limit Container_Weight Weight_Unit Save_Product_Number Run_Product_Number Product_Listing_On Product_Listing_Off Print_Interim_Report Print_Final_Report Print_Product_SetUp_Listing Clear_Stat_Buffer This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
For More Info
Overview of Parijat Drivers: Click here
Additional supporting Info about Parijat Drivers:Click here
Complete Related Driver options: Click here
1 download
Updated
-
WITS (Wellsite Information Transfer Specification) for HMI/SCADA
By Scadadoctor
The WITS Level 0 Active driver is used for the transfer wellsite data from one computer system (such as a Measurement While Drilling [MRD] device) to HMI, SCADA, and OPC client applications. Exploration and production service and operating companies are able to monitor real-time data like compass direction, borehole pressure, temperature, vibration, shock, torque, and more
Features
- Supports all device which uses standard WITS level-0 protocol.
- Supports up to 256 WITS Level 0 Active devices
-Single device per channel (peer-to-peer)
- High-speed communication using embedded Ethernet tool.
- Package-oriented data transfer
-Data Types Support-Short, Long, Integer, Float, String
-Support for WITS All Code Numbers
This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
For More Info
Overview of Parijat Drivers: Click here
Additional supporting Info about Parijat Drivers:Click here
Complete Related Driver options: Click here
5 downloads
Updated
-
DSM3260 CEMS Analyzers for HMI/SCADA
By Scadadoctor
Features
ParDSM3260 driver can provide control& monitoring of DSM 3260 analyzer units (data acquisition and control unit, from Odessa Engineering). It helps record average or instantaneous voltages having DSM 360 as a digital voltmeter, via its RS-232 port.
This driver supports .NET Framework 1.1
Driver functions:
T-ReadTime
WriteTime
P-Read5minute
H-ReadHourlyCurrent
1-ReadHourlyPrevious
C-ReadCal
This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here
For More Info
Overview of Parijat Drivers: Click here
Additional supporting Info about Parijat Drivers:Click here
Complete Related Driver options: Click here
0 downloads
Updated
Sign in to follow this
Followers
0