Posted 19 Sep 2015 Hi , i am new with Mitsubishi devices. i want to connect and control FR-E700(SC) via GOT GS2107- WTBD but i confused about selecting suitable Connection cable ; after cheeked manual founded that this special cable prepared by user and i get a lotoff diagram's but i wandered with plug out terminals of RS422 & RJ45 !!! can you help ?? Share this post Link to post Share on other sites
Posted 21 Sep 2015 (edited) You can connect to the Mitsubishi inverter via the programming port (RJ45) or if it has an extra RS422 port you can connect to that as well. The FR-E700 doesn't have an extra RS422 so you will need the RJ45 Cable. example GT16 and FR-A GT16V FR-A700_sample_Ver2_ej.zip p.s. There are already sample screen the library of GT Designer. Edited 21 Sep 2015 by Gambit 1 person likes this Share this post Link to post Share on other sites
Posted 21 Sep 2015 Thanks Gambit :) Thank you for your help and I'm going to try ......... Share this post Link to post Share on other sites
Posted 21 Sep 2015 For diagram i need to Set the terminating resistor using the terminating resistor selector. is model GS2107-WTBD have this selector ? Share this post Link to post Share on other sites
Posted 19 Oct 2015 my friends ... i followed ( MITSUBISHI_FR-E700EX_V_Ver2_E.pdf ) of upper example and link this cable ; but i have communication error !!! Share this post Link to post Share on other sites