Formatting Q02(H) with MBOC

[Stuartjl 0]

Hi, I have the above PLC. That I need to put the MBOC on. Currently the PLC has nearly been commissioned, so it has PLC code, setpoint etc. I will save these. When I format the drive on the PLC for MBOC will I need the standard red serial cable for downloading to the PLC or will my Ethernet connection still work? Stu

[kaare_t 155]

If you power off the PLC after formatting the drive, I'm pretty sure that the Eth card will reset to default. So I would, just to be sure, bring the red serial cable.

[Stuartjl 0]

Thanks kaare_t thats exactly what I needed to know. Edited 25 Feb 2015 by Stuartjl