Search the Community

Showing results for tags 'reliance electric'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 6 results

  1. Hello everybody,   First, I used the BMX NOR 0200H module associated with a GSM modem, for the time stamp and the problem is at the level of data recovery (slave PLC), I received the value of the variable (it's OK), but instead of the modification date of the variable, I received the send date (from the master PLC to the slave PLC).   After this application, I tried to use Web Desinger to do the timestamp by recovering a .csv extension file, but the file does not generate in the memory card (I accessed the module's memory card by an FTP client).   At this stage, the BMX NOR 0200H module, does not respond to a new configuration or a modification (either by Web Designer software or by Web Server, even these last two confirms me by a dialog box that the module has accepted the change).     Thank you all for your attention.    
  2. Automax Reliance Electric Drive

    I have a Reliance Electric Drive Digital I/O Module 57401 that won't close the MCR contact R1/B3.  I believe I've narrowed the problem to the 4 input signals WDOK, BD INIT, INIT, FAULT on the Multibus.  Does anyone know how to access those signals from AutoMax Executive.  I have also made a breakout cable, out of an old output card to access those signals.  The problem with the breakout board is that P1-16 does not carry over to the empty slots 5, 6, 7, 8 and slots 11, 12, 13, 14 are full with the drive cards in question.  I would also like to find out what drives those signals, especially the Fault signal on P1-16 of the Multibus.
  3. Hello, everyone. I want to ask for help..  i want to upgrade HMI hakko V7 to V9.. have file hmi in V7 use software V-SFTV5 but when I open file V7 use software V-SFTV6 its cant convert and i attached the screenshoot below..  can someone tell me what's wrong?
  4. Hello, I am new to the forum. Being doing a lot of googling to see if theirs any cross-compatibility between an M241 PLC and a Simatic panel PC and stumbled across this forum which hopefully could help me out. I'm starting an automation project to automate my home brewery. The M241 from Schneider electric seems to tick the boxes for what I require.  At my work theirs a redundant Simatic Panel PC 670 just waiting to be recycled. My question is, can I use the panel pc purely as an HMI for the M241?  
  5. Are there any good guide books out there that parse down the NEC to the sections relevant to controls engineering and panel building?
  6. Which one Baldor Motor is best for Industrial purpose like food processing?? Please suggest .