Search the Community

Showing results for tags 'concept telemecanique'.

  • Search By Tags

    Type tags separated by commas.

  • Search By Author

Content Type

Find results in...

Find results that...


Date Created

Last Updated

Filter by number of...

Found 18 results

  1. Hey there, I have a very special question for all experts in the old TSX-PLCs. We got about 20-30 TSX87 (and some 107) running in a big Ethway-Network. Our Maintenance-Service is using an old PC with OS2 and PL7-3 for troubleshooting and programming the PLCs. Is there any way to run a OS2-Virtual Machine on a Win10-Host PC and get the Ethway-Protocol routed inside the Virtual Machine? We managed to get OS2 and PL7-3 running inside the VM, but we fail to get the Ethway-Connection inside of it. We use some PCI Ethway-Cards. I don't know the exact name of the card in the moment, but if it is necessary for an answer i will find it out.   Greetings from Germany
  2. Hello, denizens of Mr.PLC. I'm trying to talk to an old TSX17-20, and have acquired the DOS files for PL7 22. However, when installing via floppy drive, I'm getting a fatal error saying that the User Interface is missing. FATAL ERROR: 251 Your Telemecanique system in incomplete. Ensure that User Interface is correctly installed.   I'm aware that PL722 (and PL7-1/2/3, etc.) require Telemecanique's DOS User Interface to run, but I can't for the life of me find installation files, and, as it is no longer supported by Schneider, no luck getting it from their site. Apparently, it used to be hosted there. Would any of you wonderful folk have the links or files to this user interface? Apparently, PL7 22 5.0/5.1 have never required/no longer require a license. It was a drag to find these files, so I'm posting the PL722 files (in two zips, representing the two floppies) so that there's an easy to find reference for them. PL722D1.ZIP PL722D2.ZIP
  3. Hello all, is anybody out there who may read out a program that is stored on a telemecanique cartridge (more or less of 1993)? Program is still running on a TSX 47 40, but have an identical second cartridge. I would send it to him/her even if international post and do not necessarily require the cartridge back. Would be great to have the program as a text file / pdf / hardcopy. Any help appreciated!! Best regards Stefan
  4. I want to offer my industrial surpluses for your projects! All details are verifiable. Excess surpluses often occur. Sending to any country in the world. The price is low. I can pick something up for you personally. Sending can be made, both expedited, and economy air delivery. Ukrposhta or EMS Ukraine. Siemens Simatic, Wieland,  Wago 750, BECKHOFF, Schneider electric, Schneider Automation, Yaskawa Omron, KEYENCE, Pepperl+Fuchs, Telemecanique, ABB, FESTO,  DUNKERMOTOREN, Eaton, Micro Innovation, Jumo, Phoenix contact, Bruel & Kjaer, Unitronics, Samson, Danfoss, OMRON, Rexroth Indramat, Fanuc.  https://www.ebay.com/usr/vitalij6131   All parcels are sent by Airmail, are processed with disinfectants and sent with a large number of bubbles before being sent. For safe delivery of the parcel to you! I am worried about your safety, in this difficult time for you!
  5. Hi We have some plc programs written by concept 2.1 b2.1 XL ,concept 2.1XL. I need setups of these versions
  6. Dear All, I Have line working with TSX 87 425  I need to know type of software to access to plc program "does it working under (OS/2) and  can I make it on VM  type of connection cable how to get it , thanks in advanced 
  7. I have a program that was developed in modicon Concept, dont know what version it is. I tried to  open  with the version 2.6 XL but when i tried to open  the .prj file, it says the version does not match..is there a way or how to convert this program to version 2.6 Concept? 
  8. I've got an old Modicon PLC E984-265 that was programmed with Concept V2.2 SP2 program.  If I have Concept V2.5 or 2.6 can I upload the program to my computer using a new software program? Thanks.
  9. Hello, Does anyone know of a compatible printer for the TSX T407? An old PLC conversion is coming up - need to convert a system with 1 x TSX 47-40 as master looking at 4 x TSX 17-24012 slaves. I have the TSX T407 10 Programmer w. language module TSX TS4 50F (french) for the TSX17 PL7.2 - also have the TSX 17ACC7 adapter for TSX17/ TSX T407 communication and the TSX CTC03 cable (9pin -> 15pin) - communication works well.. even if language is French. For the conversion and instead of handwriting rung by rung, I would like to Print the TSX17 program logic. I see there is both a 'Transfer to Printer' option in the Programmer and what seems to be a Parallel Port - however initial attempt to print to an old printer failed. I take certain protocol is needed in the printer. Bonus Question: For the TSX 47-40 I assume I need to acquire the TSX-TS4-21E language module for TSX 47-40? Anything else to talk to this old sweetheart? Same adapter and cable for the TSX17 works? Thanks in advance, JP  
  10. I need to charge a plc program on a TSX67. Can you tell me which cable and program  I need to connect and charge to the TSX67Can you help me please?
  11. Hi, I need the Service Release 1 (SR1) for Concept 2.6 XL English. Just I need the SR1 So any one have it and upload it. I have SR 7 but I need SR1. Thanks.
  12. Hello everyone, I have Concept version 2.6. However I have a few PLC programs that were developed with Version 2.2. According to Modicon, the Concept programs developed with version 2.2 can not be opened with 2.6 (higher version). Wow!!! However, if you opened them with 2.2 and exported them out to an ASCII file, then you can open them with version 2.6. My question is: does anyone have a 2.2 version? Can I please help me just to export them out? Thanks, Arde

  13. pl707 software

    juansystem05 posted a topic in Other PLCs

    Hi everyone: I wonder if someone at this forum Could help me. I am looking for the PL707 programming software and can't find it anywhere. The download link from scheinder electric doesn't work. If someone can help me it would be highly appreciate it   regards

  14. PLC Input Output sequencing

    ACMCspark posted a topic in Mitsubishi

    Hi all , new on site and looking for some help please. Need simple solution to the following example. Imagine a clock face. At every 45 degrees , I need an input and an output from the same input some milliseconds later. Before I get to 90 degrees , input 1 is now off awaiting input 2 at 90 degrees and so on. For my 360 degrees , this would require 8 inputs and outputs with only one input / output active at any one time with the program repeating the sequence continuously when back to zero degrees. Info please on suitable small inexpensive PLC and any suitable position feedback device , thanks , Al..//
  15. I am struggling with the following problem: We have a Momentum PLC running with a project downloaded from Concept 2.6. When I make a small change into the project and I download the change to PLC there seems to be no problem. But when I try to run a visualisation project in Vijeo Look then after any click in visualisation the yellow triangles with red crosses appear over every object on the screen. We run OFS to enable communication between PLC and Vijeo Look. We use non-allocated variables in the project and probably the Visualisation does not work well with those unallocated variables after project changes. Can someone please describe steps which need to be taken to compile or upload a Concept project so that it works well in Vijeo Look with unallocated variables?
  16. On Momentum PLC we have setup remote network modules as follows: On output modules with ADO 740 50 we have setup Last Value to Set to 0. Does it actually mean that the output value will be set to 0 in PLC memory immediately when PLC loses ethernet connection with the output module? We have setup hold up timeout on 170 ENT 110 01 on the remote side, but I am not sure how exactly the Concept parameters work with output remote modules. In the Concept documentation the process how Health Timeout and Last Value works is poorly documented. So the question is basically: How does Health timeout and Last Value parameters work in Concept Ethernet I/O Scanner with Momentum and remote output module ADO 740 50 with ENT 110 01? When timeout occurs in communication with output module ENT 110 01+ADO 740 50 and Last Value is configured to "Set to 0", does it mean that the output variable assigned to this remote module is set to 0 in PLC memory? If there are Timed out transactions on PLC with Health timeout expired, would that appear in Ethernet statistics on Momentum web page?
  17. Dear all, I try to program function block. I have two WORD 402309 and 402310 in Hex the value is 410 for the first and 2A7A for the second. I need to read the value as a DWORD 4102A7A. Do there is DWord to DINT function block in concept 2.6? Do there is a way to convert the value easily? Regards.
  18. Dear all, I need some help with programming time in concept 2.6 in FBD. I use momentum PLC 171 CCC 980 30-IEC I would like to program 24Hours Clock with day, week and year. Can someone help me with this please. Regards Sam