mulderm

What is the solution?

Hello Rod, How must I do this? mulderm

Hello, I programming Step7 Microwin for S7-200 plc´s. What are the difference between V- and M-memory and what will the best option? Greetings, mulderm

Hello, I have installed Siemens WinCC flexible 2005 micro on my Windows Xp notebook. Now mine computer (pc) is very very slow. When I installed the software on an other computer (desktop) this is also very slow. Somebody recognized this? What is the solution? Greetings, mulderm

The only option for the Area-pointer is the plc Time/Date. No other option is available. mulderm

Hello, I use Wincc Flexible 2005 and an OP73 micro Panel with a Siemens CPU 222. How can I send from the plc a created screen on the panel? Example: When M0.0 is "1" then get screennumber 5 on the panel. I have searching on the manual but can´t find this remote controlled screennumber option. Who knows? Greetings, mulderm

Hello, I use Wincc Flexible micro to program the OP73-micro with the S7-224 CPU. Now I have problems to make alarmscreens with this software. There is no example programa´s delivered with the install-software. Who knows where I can download the program-examples of the Siemens OP73 micro so I can learn it? Greetings, mulderm

Hello, I have a S7-200 with a Ethernet-module CP243-1 installed at home. On my notebook I have a pcmcia-network card and installed Microwin V4.0. So I can programming the S7-224 cpu and can see the online-status of the program using the ethernet-connection from my notebook to the CP243-1. It works excellent! Now I want program and see the online-status of the cpu on an other place then at home example a holiday-adress or by the neighbour. So I must plug my network-connection of my notebook to the internet from my neighbour and make a connection from the CP243-1 to my router at home. Is this possible? Can I program and see the online-status of the cpu anywhere example on a holiday-adres with Internet-connection? Who know the answer? Greetings, mulderm

Crossbow, But what is the Port-number for the port-forwarding of my virtual server from my router? mulderm

Hello, I using RSView Studio ME for the Panelview Plus 700. Now I want to make alarms and information messages. When I trigger an alarm (example N7:0 =1) then an alarm message must coming with an information message. Now when the alarm is disappear (N7:0=0) I want that the alarm window and the information message is automatic closing. How can I do this? Are they any examples of alarm and information messages using RSView Studio ME? mulderm

Hello, I want to connected the Siemens OP73 to the Siemens S7-200 plc so that I can also put the programming cable to it. I using the Profibus adapter 6ES7 972-0BB41-0XA0 but how are the connections from the OP73 to this adapter? From the manual I must using a MPI-network but how are the cables connected? Greetings, mulderm

Hello, I have replaced an old Panelview 1200 with the Panelview 1500 Plus on a remote I/O connection from a plc5/25 processor. Everything works good but the only problem is the update rate of the tags in a screen. When example an output O:027/00 is high then about 4 seconds later this change is visible on the screen. How can I make this faster? Greetings, mulderm

Thank you guy´s for the help. It´s now faster. mulderm

Yes, The old panelview was also a Remote I/O type. mulderm

Thank you both for the information. mulderm

Hello, On a machine I have a PLC5 system with a PLC5/25 processor with a lot of input/output cards. Totally rack numbers are 6. Now for the modification of the machine I must have serial communications with a serial-printer and a lot of input/output signals. Normally I must use a basic-module for this (1771-DB/B) but there is no place in the rack (1771/A4B). So I want to make a new PLC-system that can communicate with the PLC5/25 processor (DH+) and have serial communication for the printer. Also using new input and output signals. What for system I can use? Must be a system that´s smaller as the PLC5-system. Micrologix - Controllogix? mulderm

Hello, Using Panelview 1500 Plus panel with RSView ME Studio converted application from Panelview 1200. When I set the screensaver-time at 5 minutes after that I will send the remote display number connection to screen-number 15 (main menu) but nothings happen. Only when I press a key then screensaver disappear, why not by remote display number connection (global connection)? This was working with the old Panelview 1200. mulderm

But how the macro is builded? mulderm

Please send me an example file for the options your have given! mulderm

Hello, Using RSView Me Studio for Panelview Plus 700 display. I want to use a gotodisplay button, placed in the mainmenu, to go to a security screen. Then I must type a password to go to this screen. How must I configured this? mulderm

Hello, I have a Panelview Plus 700 terminal with an application running on a DH+ network. Now I have changed the application with using of RSView Me Studio on a notebook. Can I test this application with the notebook on the network or must I disconnect the Panelview? Greetings, mulderm

Hello, I want to write values to tags on a Panelview Plus 700 using RSView ME Studio. Must I use numeric input enable buttons to write values to the tags in the PLC5\25 processor? I have 20 tags to write for, so I must have 20 input enable buttons and 20 function keys to press the button!That's a lot! Is there another way to do this? With a selector? mulderm

No, no spaces available. mulderm

Who have an answer of my problem? mulderm

It's not a touchscreen but a keypad. mulderm