F940GOT on Melsec/H Remote IO Network

[cadomanis 0]

I have an applciation where I have a Meklsec/H Remote IO network with 2 racks of io in one build, and another rack in the primary building. Primary build has PLC CPU, master module, and some limited IO. Remote IO racks have IO modules, AD, DA, and CCLink. I am wondering if I can conenct a F940GOT on the remote rack somehow and stil monitor all of the system. Could either go directly into the remote slave module or could add a C24 serial module on the remote rack for the GOT conenction, Any thoughts would be great. Chuck

[Crossbow 296]

You should be able to connect a C24 module on the remote rack and connect the screen to that. I don't think there is any way to connect it to the remote I/O adapter directly.