c200h communication card ?

[joes 0]

I'm trying to connect to a c200h-cpu21-e unit that has an error... can I use this card C200H-ASC02 or the nt20m rs-232c connector or do I have to have use a C200H-LK201-V1 card? thanks Joe

[gtsuport 61]

You will have to use a Host Link Module. Options are the C200H-LK201-V1 you listed, or a cpu mount unit 3G2A6-LK201-V1. The C200H-ASC02 is an ASCII/BASIC module. The NT20M does not support pass through programming. Hope this will help.

[svn 0]

If you are going to use 3G2A6-LK201, you may also need C200H-BP001 or BP002 adaptor if the cards on the left of CPU have terminal blocks protruding out of card surface level. In many cases I needed to use this adaptor. SVN