Remote Configuration from PC using Hyper terminal

[lchamarthi 2]

Hi All, This is not purely Omron related query but somebody might experienced in handling this Omega products. Sub: Remote Configuartion of Parameters from PC , not from the Front panel Keys We purchased one Omega RD4/6 Remote display unit. It is working as per the Specs sheet with the product. we can change the alarm limits & display colors settings i.e. (Configuration parameters) can be done/set through its front panel keys. I could able to display the data from Hyperterminal when RD4 is not configuration mode. When I tried to set this limits from PC, it is not allowing in confg mode. But is it possible to configure these settings from PC remotely using Hyperterminal? If not direclty with existing, can i achieve by add on something (Software or Hardware) to existing? Thanks in advance all........ LChamarthi Edited 3 May 2006 by lchamarthi