RSLOGIX 500 TAGS ---> GTWORKS 3

[mr.G 0]

Hey guys ! I'm working on a project where I need to load in some native tags from rs logix 500 into GT Works3. It's only giving me the option if I use a CompactLogix PLC tho not a micrologix PLC. Does anybody know how to put in native tags with a micrologix ????

 

[mr.G 0]

It is also grayed out where I would normally import a native tag 

[pturmel 160]

Which model MicroLogix?  One of the new ML8xx family?  If so, you will need to use Control/CompactLogix(Tag) mode, for access to some global variables, or assign Modbus addresses within the ML8xx program.

[mr.G 0]

1 minute ago, pturmel said:

Which model MicroLogix?  One of the new ML8xx family?  If so, you will need to use Control/CompactLogix(Tag) mode, for access to some global variables, or assign Modbus addresses within the ML8xx program.

It's a MicroLogix 1500 (1764-24AWA ) , and thanks for the response !

[pturmel 160]

I would expect you to need to use the SLC500 driver for that one.