Posted 12 Oct 2023 HI, I am trying to write a program to read the timer up to 2 seconds, then use that time to calculate the frequency per hour the machine is running. Could anybody point me in the correct direction to Read %TMx.V & store that value. I have done this with Omron, but do not use SoMachine Basic very much, so am a bit lost, I used 2 timers, one 20Ms to collect the number of the 2 second timer, set read reset. add the 20ms back on then do the calculation then multiply by 60, to got sheets per hour of a printing machine. It was suggested count how many over 36 seconds then multiply x100, but that is slow, mine was close enough & instant. Thank you. Share this post Link to post Share on other sites
Posted 26 Oct 2023 Could you show us your OMRON Ladder diagram to be convert them on SoMachine Basic? Share this post Link to post Share on other sites