Posted 21 Jul 2023 Hi, I have the next question How can I use the M8000, H8192, or D8092 on my ladder programm, I know this devices are system special by the device but I need them cause a Modbus command needs it Share this post Link to post Share on other sites
Posted 24 Jul 2023 (edited) M8000 are the old FX special. The FX5 is more like the system Q/iQ-R SM400 etc. As for mofbus there is an example program in your e-manual See PAGE ID: JY997D56101-6B in your e-manual viewer I expect you want serial modbus because you don't need any porgramming for modebus TCP/IP Edited 24 Jul 2023 by Gambit Share this post Link to post Share on other sites
Posted 24 Jul 2023 6 hours ago, Gambit said: M8000 are the old FX special. The FX5 is more like the system Q/iQ-R SM400 etc. As for mofbus there is an example program in your e-manual See PAGE ID: JY997D56101-6B in your e-manual viewer I expect you want serial modbus because you don't need any porgramming for modebus TCP/IP The connection is made by half duplex mode, but when using the command to recieve data the values are 0 and verify that the data is acord to the coils from the slave, so I was suspecting that maybe the data went to another memory Share this post Link to post Share on other sites
