2 x FX5 PLC with HMI

tBirdJohn · 20 Jul 2023

I've got 2 x FX5 PLC along with HMI all work fine.

It was decided to replace one of the FX5 for a larger one. The replacement FX5 was set to the correct IP address. Thinking this was going to be fine.

The new FX5 was not bring any values into the HMI and also could not connect over the network.

Any help please.

Gambit · 20 Jul 2023

If you replaced an FX5 with another FX5 than the porgram schould be the same and the GOT should be able to comm.

Have you checked the diagnostics from the HMI and Ethernet diagnostic in the FX5 ?

2 posts in this topic