How to upload / backup all the Parameters from Powerflex 7000

[RDave 0]

How to upload / backup all the Parameters from Powerflex 7000? The Rockwell manual has a method explained to download the Parameters "file" using Hyper-terminal (Serial Com), but is there any interactive approach of uploading the parameters which can be read/edited and downloaded back to the Drive? The step by step procedure for uploading and downloading the parameters from Powerflex7000 would be appreciated.

[alan_505 24]

You should be able to use either Drive Executive (DE) or Connected Components Workbench (CCW) and use a 1203-USB to connect or if it is on ethernet connect over the network..

CCW is free but DE costs.