WEG Drive (SoftStarter)

[RuanInstr 0]

Hello

I have a WEG drive using a ANYBUS CompactCom M40 Module running on Ethernet/IP the PLC I am using is a RSLogix 5000.I want to make a DDE connection to this device using RS-Linx can someone please tell me how to do this I can configure the diver but not sure what the tag should look like 

 

[BobLfoot 302]

RSlinx will need and EDS to know how to communicate with it/

The One here should work - https://www.anybus.com/technical-support/pages/files-and-documentation---compactcom?ordercode=AB6604

In Studio 5000 you'll either need to find an AOP for the device or use the Generic Ethernet Module and setup the Input and Output instances as defined in the EDS.