QCPU Set Time to CPUS on Melsecnet

[myork82 0]

I have a group of 12 Mitsubishi PLC's on a Melsecnet and have the SNTP time server working on the Master PLC. (Q03UDV) I found under "Set Clock" where I could broadcast the time to the other processors on the Melsecnet which I tried and it worked. Is there a way to have the Master broadcast and set the time on the other CPU's on the Melsecnet automatically? I could dump the clock data to a W0-W3 in the master for example and then in the slave CPU's dump the values of W0-W3 to SD210-SD213 and then turn on SM210 which would set the clock, but I would have to do that in all 11 slave CPUS's. Be nice to do it automatically like I clicked the execute button in the attached picture.      

[Gambit 326]

Check the melsecnet H reference manual and look for the following dedicated instruction:

RTMWR

Write clock data into other station

or

RTMRD

Other station clock data read

Edited 23 Aug 2021 by Gambit