power up mode

[prabhakar_ratnam 0]

I configured versamax plc cpu to come to run mode when power comes after power failure. But it is not functioning.. whenever powerup plc is not coming to run mode.. please suggest me to sort out this problem.

[Steve Bailey 118]

Check the fault tables. If it's configured to power up in run mode and it won't, the reason is probably that there is a fatal fault preventing it from running. Once you correct what caused the fault and clear the fault tables, you should be good to go.

[Guest RussB]

Also Make sure that you updated the Flash, if being used after you changed the confiuration.