GT2710 MP4 video playback from SD CARD

[YRT 0]

Hi all, i got problem. I'm using GT2710 dan Q03UDE PLC. I want to play *.MP4 video from internal SD Card attached to GT2710.
I already create special function switch and chose video playback for filename 1.MP4 stored on root of sd card. But the video wont play at all. Only switch to play video screen and note on the bottom "This function cannot be used right now". What should i do? I already re-decode the mp4 with simple MPEG-4 as written on mitsubishi manual. 
Please help.....

[Gambit 330]

Looks like you haven't downloaded the special os for it.

It's in the download options.

write to GOT => write options => application selection (select video)

Edited 28 Aug 2017 by Gambit

[YRT 0]

1 hour ago, Gambit said:

Looks like you haven't downloaded the special os for it.

It's in the download options.

write to GOT => write options => application selection (select video)

Hi, thanks for your reply. I will try it later.

[YRT 0]

On 8/28/2017 at 4:57 PM, Gambit said:

Looks like you haven't downloaded the special os for it.

It's in the download options.

write to GOT => write options => application selection (select video)

Hi, which one shoud i use? I already tried extended application --> Video/multimedia --> multimedia
But no luck.
Do i must use GT27-MMR-Z to play video on GT2710?

[Gambit 330]

Multimedia should be enough

Attached is a GT16 project with a movie. Just convert it to a GT2000 and test this.

 

GT16 Multimedia file play.zip

[YRT 0]

Just now, Gambit said:

Multimedia should be enough

Attached is a GT16 project with a movie. Just convert it to a GT2000 and test this.

 

GT16 Multimedia file play.zip

Thank you very much for your help. I will try it later