From julian55 PM

[Jay Anthony 118]

Hello

new member , I have never programed a PLC of any type before my experience has been building and installing control systems .

my question is, I have some cpm2a training boxes and was hoping to learn about programing them with 13 others I have downloaded

cx- programmer and all the other stuff that comes with the download .

I can connect the plc. to the comm port and run the software . the problems I am having is cannot find how you load and run your saved file or how you test it

I have looked on youtube  not find anything I made a simple program one n/o switch ,one relay saved it can anyone tell me the proper Process for loading and running

the test box I have has a program that auto start and runs how to stop it .

[himanshuKamboj 0]

First of all you have to connect to the plc and then download your program ... You can Press Ctrl+T and the pop up will appear from there you can download your program.