Posted 31 May 2016 Dear all, Does anyone have a NTXS verion 1.03? I can only find ver 1.04 in the internet. I am having a trouble while replacing NT3S-ST124B-E. The old one is using RS422 Communication. using a 5 cable in pin 1, 4,5,8, and 9. But it can not communicate after i download the old program I uploaded(firmware ver 1.03) to the new unit (firmware ver 1.04). it keep saying com 1 Communication Error. From the manual NTXS software, I discovered that the communication driver supposed to be downloaded together with the firmware. I used this cable RS-232 connection for programming (upload /download) and it works perfectly fine: db 9 Male (NT3S-ST124B-E) to db 9 female (PC) 2 to 2 3 to 3 5,9 jumper to 5 The program i managed to upload using NTXS 1.04 in Win 7 32 bit and sucessfully download to the new NT3S in Win XP 32 bit (tried so many times but it fails on Win 7 32 bit). The program says that the NT3S is connected to CJ1 PLC. The cable used to connect to the old NT3S is using Pin 1,4,5,8,9 which means it should be RS422 (Xtra Drive). I wanted to try using version 1.03 but I can not find it. Regards, Budianto Scanner NT3S.pzm Share this post Link to post Share on other sites
Posted 31 May 2016 (edited) NT3S Edited 31 May 2016 by Jay Anthony Sorry. Wrong version. Share this post Link to post Share on other sites
Posted 2 Jun 2016 Courtesy PDL: NTXS_1.03.zip 1 person likes this Share this post Link to post Share on other sites
Posted 15 Nov 2018 (edited) Could you please provide the firmware for NT3S-ST124B-E? My equipment says that I need to download the firmware, but i can't find it. Thanks in advance Edited 15 Nov 2018 by PLCforall Share this post Link to post Share on other sites
Posted 16 Nov 2018 The product was private labeled by Omron from Renu Electronics. If you have lost the firmware, you will need to contact Renu Electronics. http://www.renuelectronics.com Share this post Link to post Share on other sites
Posted 16 Jun 2019 (edited) i need firmware for NT3S-S126B-E thank Edited 16 Jun 2019 by Parviz Share this post Link to post Share on other sites
Posted 1 Sep 2020 On 15.11.2018 at 6:55 PM, PLCforall said: Could you please provide the firmware for NT3S-ST124B-E? My equipment says that I need to download the firmware, but i can't find it. Thanks in advance On 16.06.2019 at 4:48 PM, Parviz said: i need firmware for NT3S-S126B-E thank If you run NTXS As administrator, the firmware will download to HMI without errors. Share this post Link to post Share on other sites