Posted 26 Nov 2014 Hi All.. Happy Thanksgiving..!! I have a MicroLogix 1100 running a High Speed door. The problem is that when I:0/7 (Photo Eye) or I:0/6 (Rev LS) goes true after the door starts down, that it does NOT reverse and go back up. Once it is down and I:0/7 or I:0/6 goes true the door does go up tho. Any advice or edit would be appreciated. Im just not seeing it but Ive been looking at it too long. :) Thanks HSDOOR.RSS Share this post Link to post Share on other sites
Posted 27 Nov 2014 Just browsing the code your problem seems to be with rung 1. The DOOR **TOP** LS (ON=DOWN) door down switch must be made (in the down position) for your door memory bit to be set. Looks like I:0/6 needs to branch around it so that the door will immediately reverse if something is under it. I'm unsure of the function of I/:0/7 but if you want it to be able to operate with the door in mid position then I:0/5 may just need deleted completely from that rung. Share this post Link to post Share on other sites
Posted 28 Nov 2014 Well... I will try that , but that would not drop out the door going down tho, would it..?? Share this post Link to post Share on other sites
Posted 28 Nov 2014 No I don't think it would. But you could unlatch your door down memory when you latch your door down memory couldn't you? Share this post Link to post Share on other sites
Posted 30 Nov 2014 Well...This is what I ended up with. Works GREAT..!!! ThanksHSDOOR.RSS Share this post Link to post Share on other sites
Posted 30 Nov 2014 Glad to hear, thanks for sharing! Share this post Link to post Share on other sites