PowerFlex 70 Remote Display

[Mac 1]

I was wondering if anyone has installed a remote display for a PowerFlex 70 unit. What we are looking for is a digital display to indicate what speed a conveyor is running at, from a distance of a 20 or 30 ft. The HIM display is just not visible enough. Any help would be great. Thanks

[pcmccartney1 141]

Look at Red Lion and wire out the Analog Output to the Display

[dmargineau 6]

I'd configure one of the PF70 analog outputs to follow the VFD's Output Frequency parameter (P001) value and then send the resulting analog signal to a Red Lion LD Large DC Voltage/Current Process Display. http://www.redlion.net/Products/Groups/DCCurrent/LDA/Docs/08017.pdf Edited 19 Sep 2013 by dmargineau

[Mac 1]

Thanks guys. I knew I came to the right place. I'll try that.