Quantum NOE771

[Cogen Ken 0]

I have built a new plc rack and am using some old used Quantum parts for the job. My problem is that all the "old boys" are gone from the shop and no one knows the password or user name for my NOE771 Factory Cast card any more. I have tried the user, useruser all caps and lower case. Is there is crack??

[billysmithde2 1]

Since it's 'old' stuff, try a firmware upgrade (probably good practice anyway). I suspect that will over write the password and reset to factory default.

[Crossbow 297]

Typically posts about cracking passwords are not allowed on this site. Your first point of contact should be your local Schneider Electric technical support to see if they have a workaround. But I think as previously suggested that upgrading the firmware will blank the module.