PowerFlex 70 Startup

[Mac 1]

Quick question. Does anyone know if there is a parameter setting or a way to get a PowerFlex 70 drive to power up to Manual mode instead of Auto mode? When we have a power outage it automatically starts up in Auto mode. Any help would be great. Thanks

[BobLfoot 302]

RTM - Page 37/190 Parameter "Digital In4 Sel "

[Mac 1]

Sorry. Forgot to mention that we are running it from the HIM plugged into the front of the unit. There are no terminal speed commands other than the default speeds. All conveyor speed changes are made from the HIM. I read that section of the manual ..at the end of that section it says : "2. If a HIM has manual control and power is removed from the drive, the drive will return to Auto mode when power is reapplied."