Mod Bus & MX2

[denise01 3]

Hello, My company has recently aqquired MX2 Inverters. I am llooking to connect them to our CJ1M PLCs via Mod Bus and then to control the speed through a NS5 Screen. Can any body please tell me the best place to view some sample programming so I can get a better idea. Regards Peter

[ParaffinPower 13]

Hello With a CJ1, the easiest way is to buy a CJ1W-SCU41, and use the pre-written function block. Pp

[denise01 3]

Hello Paraffin Power where would you access the pre- written Function Block. Regards Peter

[ParaffinPower 13]

MyOmron.com of course! Specifically here : http://www.myomron.com/index.php?action=kb&article=1278 Pp

[PMCR 66]

You can also look here for a more complete solution. http://forums.mrplc.com/index.php?app=downloads&showfile=867