Help needed programming a ZEN10CAR-A-V2 plc

[mwpeters49 0]

I need some help!! I am new to programming these PLC devices and I bought the ZEN 10C1AR-A-V2 to control some fans in an HVAC system. What I am trying to do is turn on Fan 1 and Fan 2 and let them run for 5 hours, Then, Turn on Fan 2 and Fan 3 and let them run for 5 hours and finally Turn on Fan 3 and Fan 1 and let them run for 5 hours then return to the top and run it all again........ forever. It seems like it should be dirt simple: Q0 Q1 Q2 ]\[ ]\[ ] [ T300 then Q0 Q1 Q2 ] [ ]\[ ]\[ T300 then Q0 Q1 Q2 ]\[ ] [ ]\[ T300 But clearly I'm not thinking the same way the designer is thinking. Can someone help me on this?

[lostcontrol 23]

Since I'm slightly bored & waiting for some files to copy... Example attached, not prettiest but that is what ZEN allows... Remove the .zip from the file name will leave you with a .zen file. CycleExample.zen.zip

[mwpeters49 0]

Thanks Sparky, I can't get the file to open, I'm trying to run it on a simulator. Any ideas? (I did remove the ".zip")

[lostcontrol 23]

Try this, it is a real .zip file. CycleExample.zip

[mwpeters49 0]

Thanks, I see my issue. I appreciate the effort.