MASTER, SLAVE AND CABLE

[Guest VZCONTROLES]

MASTER AND SLAVE ARRAY HI GUYS, A SHORT TIME AGO I ASKED FOR HELP WHE I TRIED TO MAKE AN ARRAY USING 2 DRIVES 3G3MV ONE AS MASTER AND THE OTHER AS SLAVE. THE THING IS THAT I TRIED EVERYTHING TO MAKE THE ARRAY BUT WITHOUT RESULTS. ONLY WHEN I CONFIGURE N004 IN 2 NOT IN 7 LIKE YOU GUYS TOLD ME BUT THE OUTPUT FROM THE MASTER IS NOT WHAT THE SLAVE`PRESENT AS INPUT FOR EXAMPLE IF I HAVE 25 HZ IN THE MASTER IWOULD HAVE IN THE SLAVE 30. WITH N065 AND N150 AT THE MASTER DOESN´T WORK. I DON´T HKNOW IF THE WIRING IS INCORRECT COULD ANY BODY SEND A WIRING DIAGRAM ON HOW TO MAKE THE CONNECTIONS? COMMUNICATION WITH A 3G3MV USING SYSCONFIG ANOTHER THING IS THAT I MAKE TWO CABLES ONE LIKE SOMEONE TOLD ME IN THE FORUM AND ANOTHER WITH THE DIAGRAM THAT COMES WITH THE HELP FILE NONE OF THEM WORKS. COULD SOMEONE HELP ME WITH THESE THINGS? JORGE

[Sleepy Wombat 27]

Jorge, is the master outputing a reference pulse frequency or a 4-20mA signal ? If it is a 4-20mA signal then the problem would lie in the scaling (min and max values for the Slave input

[Guest VZCONTROLES]

OK SLEEPY I WILL TRY IT. THANKS JORGE