Motion Controller Cam Data Setting

[Vernon_Ice 0]

Hi Guys Need help to check if any1 have the idea of changing the cam data by using PLC (Register, Buffer Memory or Serial Comm.) Thanks

[Peter Nachtwey 15]

We do it all the time. The cam tables are usually downloaded over Ethernet for speed. The cam table can also be calculated locally on the motion controller. In both cases they can be saved in flash. A video where a new cam profile is downloaded for every log http://www.deltamoti...%20VSS_0001.wmv One cam is being downloaded while the other is being executed. Since each log is different a cam table is used only once. Edited 7 Aug 2010 by Peter Nachtwey

[Vernon_Ice 0]

Hi Peter I believe you referring to the cam stroke ratio, img2.bmp. How about the stroke setting,img.bmp, can it be changed? Normally, I change the cam data by modifying the stroke setting then press the "Stroke setting complete" button. I want to change the stroke setting using HMI. img.bmp img2.bmp