Posted 29 Jun 2010 On a multistate pushbutton, when trying to add an image to state 1 or state 0, I want to add from the given libraries. I have a standard looking three position switch that I would like to use (one image per position) yet the software will only find three of the buttons on the page that has these on it. Of course they are not the buttons that I would like to use. There are about 25 pages of Graphics, these are on page titled Buttons, which contains about 15 buttons, and the three that it finds are the AB stop start and reset. I have searched and tried various ways of importing with no success. Any ideas would be appreciated. FactoryTalk View Studio ME 5.1 Share this post Link to post Share on other sites
Posted 29 Jun 2010 Because they are not Gif of JPG files they are not importable as an image into a device like I had wanted. You have to do a screenshot, open it with paint or something similar and manipulate the images there and save as a usable file type. Share this post Link to post Share on other sites