Excel from PLC MicroLogix 1400 with Panel View C600

[colonocapitan 0]

have a PLC connected via Ethernet MivroLogix 1400 with a Panel View C600. I need to automatically generate an Excel file with PLC variables. Is any way to do this? At the moment I have the software RSLogix Micro Starter and RSLinx Classic. I hope someone can help me with this!!

[b_carlton 61]

Do a search on "Excel" in this forum and start reading. The subject of retreiving data from the PLC into an Excel file has been covered in various ways many times.

[KEGerator 0]

If you are using a PanelView Component C600, and the version is up to date (1.20 or higher), you can set up datalogging in the application. You will need to use either an SD card or a USB stick - those are the only available storage locations for a data log. The data log is saved as a *.csv file, which can be read by Excel. The help files can assist you with setting up the data log.