Posted 5 May 2009 (edited) Hi, We are using woodhead gateway 1.4 to exchange data between siemens PLC and wonderware using Brad communication . In woodhead gateway there is only provision to enter MAC address and IP address. Can anybody tell can we assign default gateway address to this Woodhead gateway apart from IP address. Without default gateway we cannot ping the IP of woodhead gateway from our server which is placed some 2kms away from PLC. Has anybody worked on woodhead gateways before.Please let me know the procedure to assign the default gateway address. Thanks in advance.... Regards Ajju Edited 5 May 2009 by Ajesh Share this post Link to post Share on other sites