TSX micro to Magelis HMI

[MpK 0]

First,, I'm new to the Modican stuff - AB man myself. I have a TSXMICRO PLC and a Magelis XBTGT HMI. I'm having trouble getting the two to communicate. I have no problem with getting online with the plc. The plc has a pcmcia card that is setup to communicate with a servo. This is working fine. The term / aux port is set to Unitelway, slave, 9600,8,1,odd. I set the HMI to the same. When the HMI reboots, it times out with and error like - PLC failed to respond in time. I tried this while being online, offline and in each port TERM and AUX. Anyone have any ideas / suggestions on thing to check? Thanks

[acpi 11]

Hi, It can not works if you are slave both sides. Set the plc to Unitelway Master and it will be ok. JC

[MpK 0]

Hi, It can not works if you are slave both sides. Set the plc to Unitelway Master and it will be ok. JC

[acpi 11]

Hi, With Unitelway as protocol, the HMI is slave, that's why you need to set the plc as master, wich is the default choice. JC