GOT1000 serie - FX PLC connection

[Alexey M 0]

Dear All, I have to connect GOT panel (GOT1155) to the FX1N PLC, but I don't have a cable (GT01-C10R4-8P) and can't wait until it will be delivered from somewhere. Probably somebody has a wiring diagram for this cable? Before we used GOT900 serie, and now it looks like cables for these series are different. Thanks in advance.

[Crossbow 295]

Cable pinout is same. Difference is the shielding and the ferrites on the cable.

[Alexey M 0]

Thanks for reply, Crossbow. But in this case I don't understand what is wrong. GOT messages "Communication error" and doesn't connect to PLC, though communication driver (MELSEC-FX) is installed in GOT, assigned to RS-422 interface and all settings seems ok. And also I don't have a communication with PLC from GX IEC Developer (PC is connected through GOT). It looks like something is wrong but I don't understand what...

[Crossbow 295]

Without seeing the GOT program and verifying comm port settings in the PLC program, there's not much I can offer.