Posted 25 Apr 2008 Hi, We have a GE Mini OIT screen model IC600KD515B. Has anyone found a replacement to this obsolete screen? Thanks, Drusso Share this post Link to post Share on other sites
Posted 26 Apr 2008 They were made by Nematron, so you might try them. If that doesn't turn up anything, try Qualitrol. http://www.qualitrol.com They repair a lot of the vintage hardware. They also buy up old stock and refurbish/resell it. You might also look at http://www.plccenter.com Share this post Link to post Share on other sites
Posted 26 Apr 2008 Steve, I was able to repair the screen this time. The 5 volt regulator had only 4.6 volts. The screen is back up. I checked the web sites you recommended and they do fix them but they have none in stock. I was just lookinng to see if anybody found a current replacement for this style screen. thanks, drusso Share this post Link to post Share on other sites
Posted 26 Apr 2008 I'm pretty sure you will need something that can run as a VT100 emulator. It might be easier to replace it with a more current HMI. What is driving the Mini OIT? Is it a program on a Basic module in your PLC? Several years ago I converted some applications that were using the GE Fanuc Series 90 ADS system. That used a Series 90 PCM module to drive a Mini OIT. We replaced the EPROM on the PCM module with the one from a CMM311 (serial communications) module and converted the ADS application to a Quick Panel HMI. Share this post Link to post Share on other sites