PV+600 and SCL 5/03 comm. through DH 485

[knadeem 0]

Hi Dears Hope you will be all right. Dears i have PV+600 with DH 485 protocol, i wanted to communicate it with SCL 5/03 that also have DH 485. anybody can tell me about the cable configuration and what cable i will have to use.i d'nt want to use 1647-AIC card. i will be thankful to you if you reply as soon as possible. Thnks

[ratcliffe_ic 2]

If you're using the DH485 port you can use a 1747-C10 (1.8m) or a 1747-C20 (6m) If you're using the 9 pin d type with dh485 protocol you can make your own pin 2 to 2, 3 to 3, 5 to 5 or buy a 2711-NC13

[slcman 9]

If you didn't want to use 1747-AIC or 1747-AIC+ module, you must use RJ-45 port of the plc. I attach the pinout for 1747-C10 cable.