knadeem

Thnks buddy; when i try to go online with the processor with Rslogix 500 , it tells me there is no programme in the processor.i have a backup of the programme and downloaded it and it goes in the normal state. thnks every body for giving there nice tips.

Dear All Hope you will be all right. i have a SLC 5/04. when i power up the system, it goes in the fault state, controller's fault LED in continuously blinking and the Digital outputs are not responding. other DI cards are ok.analog input cards also working. and communication b/w SLC and the Rsview32 is lost. and the comm. LED in aslo blinking but in a slow form. any body can help me. regarding this. thanks

Dear all Hope you will be all right. I have a panelview + 600 and wanted to communicate it over the DH 485 through 1747-AIC's DH 485 port with the SLC 5/03. i have a 1747-C11 cable for the SLC 5/03 to 1747-AIC but the cable for PV+600 DH485 to 1747-AIC DH 485 interface. what kind of the cable i need up|? and what will be the pinouts of the cable. i will be tahnkful if anybody tell me the soluton.

Hi Dears Hope you will be all right. Dears i have PV+600 with DH 485 protocol, i wanted to communicate it with SCL 5/03 that also have DH 485. anybody can tell me about the cable configuration and what cable i will have to use.i d'nt want to use 1647-AIC card. i will be thankful to you if you reply as soon as possible. Thnks

Hi Dears Hope you will be all right. Dears i have PV+600 that is not working properly, i have the Backup of the PV applicatuion ie .mer file. Now i wanted to rum it on the personal system. i have all the softwares ie Rslinx Enterprise, RSview ME STUDIO n Sation. any body can help me what kind of the changes i have to do in the .mer file so that it can run on the PC. I have to communicate it with SLC 5/05 through Ethernet.

Hey Everybody; Hope u will be all right. Dears i am facing a problem regarding the PV+ 600. it hanged on the start up. when i try to reset it, it display a message code " 2 Image Search ". and hanged up there. it is communicating with SLC 5/05 with ethernet. when i pluged out the ethernet cable its Comm Led is still permanent "green" and fault LED is OFF . i tried to communicate via the flash card and serial port but is not responding. If anybody knows about the solution please reply. thanks

Yup, you may right. i am using window xp Professional version 2002 service pack 2.

Hi Nathan; I m using RSlogix5000 when i run linx as a service,its hangs and appears as not responding.but it works normal with as application. thnks for your help. if you know the what would be the exact problem?

hi slam; man you d'nt mention about the main problem? what happen to PanelView or HIMA? Are they have lost their communication? I can help you if you describe the problem? and what really you want? Bye Take care.

hi man, i have worked with the GSC module for my scanner application. i have used it with MicroScan Ms-820 Scannner . i can send the information you required.

Hi Friends' here i mafacing a problem about the RSlinks. my rslinks in not working as a Service, but it working well as application., Is there any body who can help me. I have also try to reinstall , but the problem is there. Thnks if any body comes with a solution.