Fx2n + got900 download program question

[max 0]

Hi, i littel question: i've a system composed by a PLC Mitsubishi FX2N + a Touch Screen GOT940 connected. The question: i've made a progam with GX Developer for the PLC and a program for the GOT940 with FX-PCS-du-win-e . Can i upload the 2 program(one for the PLC and the other for the GOT) from the RS232 port on the GOT with a normal 232-232 cable? Or i must before upload the program made with GX to the PLC(with a SC-09 cable) and then upload the program made with FX-PCS-DU-WIN-E to the GOT with a normal 232-232 cable? Thnks for any help

[Crossbow 297]

You can program the PLC through the GOT connection. So plug the programming cable into the GOT, and download from both programs (but not at the same time obviously).

[max 0]

Thanks! So before i use GX Developer and i download the program to PLC. Then vwth FX-PCS-du-win-e i download the program to GOT,always using the 232 connector of the GOT. It is OK? Thanks Ciao MAX

[Crossbow 297]

Yes. It doesn't matter which you download first...