comunications

[jose bornes 0]

Hello.Please help How i can transfer data to pc mp370 touch (download ,upload)

[JesperMP 2]

Connect your PC either via serial. The serial cable is a normal Null-modem cable. MPI is also possible, but it takes a few more steps. To download: With Protool use "Download". With WinCC Flexible use "Transfer" To upload: With Prosave, 1st specify the target device type "MP370 TOUCH", and then "Backup". Notice: The uploaded file is an image file that can only be loaded on a similar MP370 panel. With Protool use "Upload". Notice: This is only possible if the orignal supplier/programmer downloaded the entire project file to the panel (the "enable upload" option must have been set at the last download). There must be a CF card inserted in the panel. If there is no CF card, then it is not possible. Edited 30 Jun 2007 by JesperMP