Slowing update rate tags.

[mulderm 3]

Hello, I have replaced an old Panelview 1200 with the Panelview 1500 Plus on a remote I/O connection from a plc5/25 processor. Everything works good but the only problem is the update rate of the tags in a screen. When example an output O:027/00 is high then about 4 seconds later this change is visible on the screen. How can I make this faster? Greetings, mulderm

[BobLfoot 302]

THis may be stupid but a couple of questions. 1. Was the old 1200 also RIO type? 2. If the 1200 was not RIO how much else is on the RIO network? 3. I seem to recall an update rate adjustmetn , but can't recall exactly where or how it is made.

[rpraveenkum 5]

you have adjust the update rate in the screen since it is screen base update rate

[mulderm 3]

Yes, The old panelview was also a Remote I/O type. mulderm

[Leadcommander 0]

As our college rpraveenkum has stated If you open the screen in question, then in the menu select 'Edit/Display Settings' Change the 'Maximum Tag Update Rate' to .05 This will improve the responsiveness of the screen.

[mulderm 3]

Thank you guy´s for the help. It´s now faster. mulderm