Search the Community
Showing results for tags 'sena'.
Found 1 result
Greetings, My application is utilizing two Omron CP1L PLCs connected through an RS232 serial link to achieve PC Link. We're essentially using this setup to message data between the two PLCs. With a hard-wired link, it works great. I can force bits in the master PLC, and see them in the slave PLC. However our application requires this link to be wireless. We got our hands on two SENA Parani SD1000 units. I've worked with these units previously to connect a serial scanner to a Rockwell PLC quite successfully. After reading through datasheets, we figured out the pin-out from Serial Comms unit fitted to the CP1Ls wasn't quite standard. So we adapted our own cables to re-route VCC and SG appropriately. So with a hard-wired link, this setup works, and the comms units on the PLCs have a nice solid lit up comms light. But with the wireless parani connection, the comms light lights up, but it is very dull compared to the wired link, and we get no data transfer. I've verified to the best of my understanding that the comm settings all match, at 9600 Baud, 8 data bits, 1 stop bit, and Even parity. Just curious if anyone has any suggestions to get this working, or if there are any settings that I might have missed that make PC Link a unique form of RS232 that these parani units can't handle? I've identified online alternative units known as the Promi SD205-OA, which has a pin-out to match the OMRON CP1L PLCs. As far as I can tell though, the units themselves function the same as the Parani SD1000 besides this pin out. Anyone know differently? Presently the serial connections made are Tx -> Rx, Rx -> Tx, Vcc -> Vcc, and SG -> SG. Would I require anymore connections? Our wired link seems to work just fine with just those connections. Any help would be greatly Appreciated!!