Search the Community

Hello Everyone, In PCS7 hardware configuration, I have connected IM153-2 FF link to a profibus master connected with CP443-5 Ext. And afterwards I have connected the field instrument with FF communication with the slave bus on FF link. However I am not able to delete the equipment once connected. The error is showing as the object is locked. How to unlock and delete the objects which were takes for testing purpose. Thanks in Advance, GJ

File Name: Recipe Sample Code - Ladder program with supporting NB project File Submitter: Michael Walsh File Submitted: 31 Mar 2015 File Category: PLC Sample Code This is a quick bit of code to show how a recipe function might be written if one were to do it in the PLC rather than the HMI. This is the basic building blocks with which a program could begin to be written. The BSET instruction combined with the indirect addressing method demonstrated would allow for a delete function. Copy and other functionality could be added using similar concepts. Click here to download this file

http://accautomation.ca/now-you-can-have-robust-data-logging-for-free-part-1/ YouTube overview: https://www.youtube.com/watch?v=6Xa2HYVOxE0 Robust PLC Data LoggerWith traditional loggers, software will read the memory of the PLC and store in a local computer. If the network stops or the PLC communication fails then the logging will stop.Creating a robust PLC data logger allows the communication to be stopped for a period of time without losing any of the data for collection. This is accomplished by storing the data locally on the PLC until communication is restored. All of the data is then read without loss. The amount of time that the connection can be lost will be dependent on the memory size of the PLC and the frequency of the data collected.This series will walk you through the steps to create and implement a robust PLC data logger using the following equipment and hardware. Automation Direct – Do-More – H2-DM1E PLC (Ethernet Modbus TCP)Do-more Designer 1.3 (Simulator instead of PLC mentioned above)Windows based computer running IISVisual Basic 6Regards, Garry http://www.accautomation.ca

Hi, I have a problem with my BC9020 and hope that someone can help me. I managed to set the IP adress of my PLC in the 10.2.5... add a root, run a program and make the PLC working for a while. I then tried another program, a new one... and now that I want to re-read the first program, Twincat System Manager doesn't allow me to enter in the "run mode" and stays in "config mode". It also has lost the IP address I set (10.2.5.....) and came back to the 172.16.22... (manufacturer settings) I cannot determine if the problem is in the PLC Control or In System Manager... This is my method to change the IP *** IP config *** 1) Reset the PLC First I place the end terminal next to the PLC. I set the DIP switches 1,6,7 to ON, power on the PLC and power off. I set the DIP switches 2,6,7 to ON, power on the PLC and power off. I set the DIP switches 1,2,6,7 to ON, power on the PLC and power off. 2) Set my PLC on the same AMS than my own IP (172.16.22...1.1) 3) In System Manager, add a new route 4) change the setting in I/O Configuration -> I/O Device -> Device 2(BX9000) -> clic on BX9000 define "set IP Address" to Manual define " IP Address" to 10.2.5...., the AMS change automatically. Press the configuration button and then Ctrl+F4 (run mode) This method worked but seems not to be the best... If you have any Ideas ? or questions? Thank you in advance Gregi