Search the Community
Showing results for tags 'omron cx programmer'.
Found 562 results
-
Hello, I am looking for Omron PLC's bit set instruction, which is similar to Mitsubishi's, like, in Mitsubishi PLC: Set B1000Z0 if Z0 is 10AA, then B10AA will be set. has Omron's instruction set contains such functionality? In my application, PLC will receive a number for example N(i.e. a sequence number), and I want to set the set the Nth bit in a memory block (W or so). Many thanks in advance. Xing
-
Hi, I have been communicating OMRON HMI NT31-ST123-EV2/EV3 for creating, uploading and downloading program screens with NTST4.6 but today I have received NT31-ST123-EV3-QR HMI but it could not be communicated with Support Tool. Can any one sort out the problem? Attached is the snap shot of error message.
-
Hello, Let me preface this. I have used this site many times when searching for issues and it has always been helpful. This is my first post here. I have been programming PLC's, HMI's, VFD's etc etc for 15 years, fairly complex stuff. I have also done lots of SCADA programming but more just for basic interface, monitoring, basic parameters changes, logging, etc etc. I am not facing a setup where I must do a large recipe/batch data transfer and I am confused as to what the best path is to achieve this. I have fairly basic knowledge of VB script as I have not needed to use it very often. Here is the problem I am facing. The SCADA package the customer has is Omron CX-Supervisor. The network is all Ethernet Based 1) I have 26 moulding machines on the plant floor2) There are 50 different moulds that are moved around from machine to machine3) Each mould can run 1 of 10 different colours4) There are 100 differing cycle parameters for each colour/mould combination =50x10x100 = 50 k points for total machine that = 50k x 26 = 1.3 million ! What the end result will be is this. From the SCADA operator terminal they would like to be able to keep a 'master set' of these settings, call up a mould/colour combo and see the individual parameters. Then they would like to edit individual parameters and download to each individual machine, or all at once. I do have a PLC at the Main terminal that was used for translation of the old serial network to ethernet. All of the serial connections have been removed so it is basically doing nothing. I could use this as a "master" for holding parameters if needed. What is the best way to go about this. Create a database, use the built in recipe manager, use PLC here as 'master storage". I feel once I get down a path it will make more sense...I just don't want to pick the wrong option and have to redo it all. Keep in mind my PLC coding is vastly superior to my knowledge of database manipulating and VB coding ThanksDan
-
I'm new to Omron, and after several days of diving into manuals trying to figure this out on my own and giving myself a headache I've come to accept that i need help. my task is the following: Control of the discrete and analog inputs/outputs in a DeviceNet system using an Omron CJ1M PLC’s and PT’s. Use at least one thermocouple, one analog input, and one analog output for the DeviceNet network. Use a pushbutton and a light for the start of the process and an indicator for the started process. I have a Drt1-Ad04 input, a Drt1-ad02 output, and a Drt1-ts04t temperature control. My devicenet is Cj1w-drm21, The Omron system itself is a cj1m-cpu13 etn21. I have node addresses for my input, outputs and temperature control, those being 35 for input, 25 or 30 for output and for temperature control 5, 15, or 20. The ip address im using for this project is 142.214.143.9I'm using Cx programmer, Designer and Integrator. On Cx programmer I've managed to create an IO table but i have no idea on how to begin the program or even get a current reading from my generator.On Designer I've made what i believe to be the layout of the pushbuttons, I just have no idea of what addresses to enter.And on integrator i'm having troubles on figuring out how to make a routing table. I've went through many manuals and either i'm missing something really basic here or I just have no idea on what I'm doing. The only advice I was given was to dive into more manuals and find my addresses for my inputs, outputs, and temperature or to find the information from an outside source be that a forum or customer service. I am able to provide more information, and screenshots of what I have done if needed. Any kind of help would be greatly appreciated!
-
I successfully read the input and output of OMRON PLC CPM2A with Indusoft web studio (IWS) by using OMPLC driver. I have select OMPLC driver (Serial Com). Then configure a driver worksheet. The driver worksheet is the place that PLC tags are associated to InduSoft tags. I successfully read the I/O but I failed to write the I/O of PLC by using IWS. Can you help me? It is difficult to find OMPLC Standard Driver Sheet (SDS) for control relay output block (CROB) and Analogue output block (AOB). The attached diagram shows My Standard Driver Sheet (SDS) setup. Thank you for your kind cooperation. Zack Malaysia
-
Hi Good Day, I need a suggestion, I have an omron encoder, encoder counter meter (K3NC-NB1A) and communication card RS-232C 25pins (K31-FLK1). My question is, what is the best omron software to read and manipulate the data from the encoder (I have CX-one software but I only use CX-programmer). I want to capture the encoder pulse and convert to velocity, acceleration, deceleration and also energy absorbtion. I have to use mathematical formula such as two times differentiation. I also need to show grapf and display final result that is energy absorbtion reading. Or is it much simple if I use VB / labview / java software? Thank you in advance
-
Hello guys, actually I am new to this Omron PLC. but i have small project to transmit a command to the GSM modem via the RS232 port so it can trigger the modem to send text msg. Can you show me the steps/guide/sample program to accomplish this program coding? I already read some topic in this forum regarding to this PLC RS232 port but still cant get the ideas when to create the ladder program. PLC Type : CJ1H (CPU65H) - RS232 port First input to trigger the GSM send text msg: AT+CMGS="+YOUR HP NUMBER" Second input to trigger GSM send text msg: YOUR TEXT MSG CONTAINS (Ctrl+z to send) Many Thanks, AlexB
-
Hello all, I am trying to connect a barcode scanner to my plc using a 232C in the serial1. The scanner is a motorolla ls3578 fz, with the following parameters: Transmit code ID: yes Data Transmission format: Data/suffix Suffix: CR(1013) Baud rate: 9600 Parity: none Hard/software handshacking: none Stop bit select: 1 Ascii format: 8 bit RTS Line state: high Prefix: none In order to send data form the scanner to the plc, I use the RXD function block with the following parameters: First receive word: D300 Control word: 0100(hex) Number of bytes: &10 All the communication settings of the PLC are the same that the scanner ones. PROBLEMS 1)When I scan something the scanner beeps as if a transmission error occurs, and the data is ignored. 2)The A392.14 never comes ON and. POSIBLE SOLUTIONS Type of barcode: Now I am using a Code39 barcode. Is it OK? How can I implement the suffix? I have a software that allows me create new barcodes, but I don’t know what kind of data do I need. With 1234567891013 the 1st problem occurs. With 123456789 nothing happens. Communication settings: maybe my communication settings are not well defined. I attach you the file and maybe someone find out an error. Thank you up front! rxd.cxp
-
Hello all I have a task to connect a auxitrol l20d to my omroan plc i have these moduls: CJ2M - ID211 - OC211 and MAD42. The l20d should go from 18-5mA and when it hits 5mA a alarm should go off, my problem is how can I adress the inputs/outputs in the MAD42. My wiring to the L20D is this : The l20d is connect to A1 5-6 with + at 5 and - at 6 How can I adress the anonlog inputs in MAD42. Could anyone help me, or maybe give me an example program? Thanks in advance ;)
-
Download from CXD to a Omron NS15-TX01B-V2 HMI via ethernet
mayseprogramming posted a topic in CX-Designer
Hi, Is there any good documents out there on how to download to a NS15 Omron HMI from CX-Designer via Ethernet? Thanks, Andrew -
communication between keithley controller 2182A & any omron plc
knowledge greedy posted a topic in Omron
can anyone please provide me how to communicate between keithley controller 2182A(nano voltmeter) and any omron plc.aslo the programme & instruction & parameters..ASAP using RS-232 interface? -
Hi i want to know anything (data sheet-video-documents) about the OMRON CJ1B BETO
