Search the Community

Hello, I am trying configure the communication between factorytalkview with ML1500, but the processor don't show in the tree. My connection PC to PLC is DF1 Serial, somebody could help me.

Hi guys, Need help!! First time using FactoryTalk SE and stuck here for hours. My objective is to create a standard object(Pump, Valve) and use it multiple times with different tag (P_101, P_102 .etc.) After read through help file and manual, I found that global object may be what I need, so i do some test with simple multi-state indicator but fail...... the log show "Failed to resolve item's ID '#1' because it does not exist on any server" Hope someone can let me know what mistakes I have make!!! My steps: 1) Create new Global Object 2) insert a multistage indicator 3) Properties -> States -> assign caption for each stage 4) Properties -> Connections -> Tag/Expression -> key in #1 5) Global Object Parameter Definitions -> Name -> Key in #1 6) Copy Global Object and paste in Display to create reference object 7) right click and open Global Object Parameter Values 8) click the tag button to browse tag from PLC online (Tag name: SV_505.STATUS, DINT, direct read from RSLINK that connect to PLC) 9) test Display result: [FactoryTalk]: The Item is no longer available: #1 Failed to resolve item's ID '#1' because it does not exist on any server I then 1) change the #1 to #1.Status, link to Tag SV_505 and repeat the step.............fail again 2) Create Memory tag and link to #1...................................................................fail again, start to miss citect genie 3) change to rectangle with fill animation with Bool tag.......................................fail again, take out lighter and try to burn the PC, operator stopped me....just kidding PS: I can link animation with PLC without problem, the error occur only when I use GLOBAL OBJECT Extra information: Software: Factory talk View Studio 6.10.00 (CRP 9 SR 4) OS: Win7 Professional SP1 64bit

I need help, the control net adapter shown FATL500ad, i need know what means this problem.

Hello, Tried to get some good and clear answers at the Siemens forum, decided to try here aswell. I have a setup with 12 G120C inverters and three gas burner units on a profibus line. If I unplug any of the devices will I of course get an error from the loaded OB. But, now and then can I lose the connection to two or more of the inverters without any notification. It seems that the communication is up and running, but the don't respond to any commands. The normally green LED on the inverters switch over to flashing red when they stop to respond. They will also show fault code 1910. I am using standard telegram 20, this is also set in the inverters parameter lists. Another funny thing is that the fault bit in the status word is always set. Even when the inverters don't hav any faults or alarms. ZSW looks like this (with or without response from the inverter): Bit 0 = 1 (Ready for switching on) Bit 1 = 1 (Ready for operation) Bit 2 = 0 (Running) Bit 3 = 1 (Fault) On all the time, even when there is no faults in the inverter Bit 4 = 0 (No coast down active) Bit 5 = 1 (No fast stop active) Bit 6 = 1 (Switching on inhibited active) Bit 7 = 0 (Alarm present) Bit 8 = 1 (Speed setpoint - actual value deviation within tolerance) Bit 9 = 0 (Control requested) Bit A = 0 (f or n comparison value reached) Bit B = 0 (I, M or P limit not reached) Bit C = 1 (Reserved) Bit D = 1 (No motor overtemperature alarm) Bit E = 0 (Direction of motor rotation) Bit F = 0 (Display CDS) Anything I might have missed or done wrong ?

I hope no-one minds that I'm cross posting this from the RA forums, I just wanted to get as much visibility as possible since there doesn't seem to be anything on the net about this. Any issue, let me know, or feel free to delete it. I'm trying to use a startup macro in my manual mode HMI application to copy the current state of my outputs to the inputs so the machine does not move or change state when switching between auto and manual modes. However, when I run the application on my PanelView Plus400 HMI, I'm immediately greeted with errors like "<macro expression>: Unable to read the expression""Read from <tag> failed"Some info: This only occurs for lines that set a tag's value to another's; if I set the tag to just a numeric value (like in the first line of the sample below), its executes just fine.There are two separate HMI applications. One is for normal / automatic operation. This one is to allow the operator to manually activate individual solenoids on the machine to aid with building, setup, and troubleshooting; it is not seen nor used in production.This occurs long after the plc has booted (manual mode is not the startup application) - so running anything on first-scan is not an option - and the HMI has no trouble communicating to these tags during operation.They are RSLinx Enterprise tags, I think - not HMI tags; they only exist in the controller / ladder. I'm able to successfully browse to them online in FTView.The expression editor reports the "tag = tag" syntax is valid.Lastly, I'm using FT View v7, but I'm creating v5.10 runtime applications.Here is an excerpt of the macro: {[Gage]MANUAL.MODE_ON} = 1;{[Gage]MANUAL.STATION_1_ESC_CLAMP_EXT} = {::[Gage]Program:Station_1.STATION_1_ESC_CLAMP_EXT_SOL};{[Gage]MANUAL.STATION_1_MOV_CLAMP_EXT} = {::[Gage]Program:Station_1.STATION_1_MOV_CLAMP_EXT_SOL};{[Gage]MANUAL.STATION_1_PROBE_EXT} = {::[Gage]Program:Station_1.STATION_1_PART_PROBE_EXT_SOL};{[Gage]MANUAL.STATION_1_ROTATE} = {::[Gage]Program:Station_1.STATION_1_ROT_180_SOL};{[Gage]MANUAL.STATION_1_SLIDE_EXT} = {::[Gage]Program:Station_1.STATION_1_SLIDE_EXT_SOL};... and so on...FTView IS able to successfully execute the macro when I test it on the development computer while it is connected to the PV+ over ethernet. If the PV+ is not connected, or the application is running solo on the PV+, no dice / same errors. I have also tried using HMI tags in all combinations in the tag and expression by tying the RSLinx tag to an HMI tag. So far, they've had the same results as above. Absolute worst case, I could edit the ladder to latches or unlatches the inputs off of a one shot from the manual mode on bit, but it would require 7 manual program changes across many in-production machines and would be very time consuming. I've searched everywhere, and the manual's not been any help - maybe I don't know what to look for. Thanks for your time everyone, ~Anthony

Hi all, First post: I just want to know if there's a way to edit/change the users (security) in factorytalk view studio (using version 7.00.00 CPR 9 SR 6) Because we use different terminals some of the users are on some but not on others and there are instances of duplication with differing passwords as well as redundant users, I want to standardise all of them on each laptop, I cant however see how to modify or delete any. Do I need to restore the directory or something? I couldn't find what I specifically wanted in the search Thanks in advance for any help, Laure

Hi, I have a challenge with GX developer version 8.63R (SW8D5C-GPPW-E). I'm trying to verify 2 projects (offline). Some programs I know there are changes but they are not shown in the verification. In 1 program I did see the last checked change was in step 1496 (next change I did see by manual check was step 1502. it seems like this type of verification is limited to 1500 steps to check. Is there any way I can make this offline verification work? the most progams that we have in our project are over 2000 steps. big thanks in foreward

can anyone please provide me how to communicate between keithley controller 2182A(nano voltmeter) and fx 3G plc.aslo the programme & instruction & parameters..ASAP using RS-232 interface? i have used the instruction as show in the attachment.

Hi everyone, my client has a Direct Communication network consisting of Allen bradley 1772-SD2 (PLC2) and 1771-DCM modules. I need to upgrade one of the adapter node from 1771-DCM to newer hardware. My client is insists to KEEP the 1772-SD2 scanner as it is. So essentially I need a recent hardware to replace 1771-DCM and work with 1772-SD2. Do I have any option to upgrading this node with recent generation solutions?

After conversation project from RSView 3.20 to FactoryTalk SE 6.0 via HMI Backup/Restore utilities I start to recieve alarm "Different ActiveX control loaded for display XXXXX that when saved" and "cause:Trend:Never file used". I think its connect to using Trend ActiveX control with old version (from RSView 3.20) in new project. All trends works properly, but i want to fix this problem. How to resolve a problem?