Search the Community

I'm new to Omron, and after several days of diving into manuals trying to figure this out on my own and giving myself a headache I've come to accept that i need help. my task is the following: Control of the discrete and analog inputs/outputs in a DeviceNet system using an Omron CJ1M PLC’s and PT’s. Use at least one thermocouple, one analog input, and one analog output for the DeviceNet network. Use a pushbutton and a light for the start of the process and an indicator for the started process. I have a Drt1-Ad04 input, a Drt1-ad02 output, and a Drt1-ts04t temperature control. My devicenet is Cj1w-drm21, The Omron system itself is a cj1m-cpu13 etn21. I have node addresses for my input, outputs and temperature control, those being 35 for input, 25 or 30 for output and for temperature control 5, 15, or 20. The ip address im using for this project is 142.214.143.9I'm using Cx programmer, Designer and Integrator. On Cx programmer I've managed to create an IO table but i have no idea on how to begin the program or even get a current reading from my generator.On Designer I've made what i believe to be the layout of the pushbuttons, I just have no idea of what addresses to enter.And on integrator i'm having troubles on figuring out how to make a routing table. I've went through many manuals and either i'm missing something really basic here or I just have no idea on what I'm doing. The only advice I was given was to dive into more manuals and find my addresses for my inputs, outputs, and temperature or to find the information from an outside source be that a forum or customer service. I am able to provide more information, and screenshots of what I have done if needed. Any kind of help would be greatly appreciated!

Hello all, first post here, and thanks in advance for the help. I'm a fairly green SCADA and controls designer and although I worked fairly extensively with these systems in the past, I followed a sightly different career path for the last several years and haven't had my hands on a PLC that whole time. Started a new job and am rebuilding my knowledge with it. Fortunately my company afforded me a PLC to take home and mess around with for this purpose. I feel pretty dumb as I am struggling to even connect with it, haha. Here are the stats: Backplane: TSXRKY4EX (end caps are securely in place) Power supply: TSX PSY2600 Processor: TSX P57 6634 First I attempted to connect via ethernet, using the IP address sticky-noted to the front of the processor: 10.1.1.80. No luck, "PLC address is incorrect, or PLC is busy, yadda yadda". As I understand, the default IP address can be converted from the MAC address. The last two MAC address numbers were: CF.87, which gave me the address 85.16.207.135. Same result with this. I tried pinging both address from the command console and had no luck there either. I happened to have a USB to unitelway adapter (Telemecanique brand) and attempted using that as well, Address:SYS.. Media:Unitelway. No luck, same answer. After a lot of frustration and hours spent scouring the internet for answers, I took the nuclear option and pulled the battery (while unplugged) and replaced after 30 or so seconds. I was assuming this would clear the memory and reset the IP to default (85.16.207.135), afterwhich I could reconfigure and start fresh. Unity still can't connect nor can I ping it. It should be noted that I am using Unity Pro XL Version 8.0, on a VMware image. I did attempt pinging from both the VM and the host machine, both can ping other known devices so connection by the VM through the host shouldn't be the problem. Neither the VM or the host recieved a ping reply from the PLC. Any help would be GREATLY appreciated. I feel I have exhausted all options and I hope I didn't shoot myself in the foot by pulling the battery. As far as whatever program was on it before is irrelevant, the PLC was given to me to do with whatever I wish, so memory loss wasn't a danger. I just need to connect to it. Thanks!!

Hello all I have a task to connect a auxitrol l20d to my omroan plc i have these moduls: CJ2M - ID211 - OC211 and MAD42. The l20d should go from 18-5mA and when it hits 5mA a alarm should go off, my problem is how can I adress the inputs/outputs in the MAD42. My wiring to the L20D is this : The l20d is connect to A1 5-6 with + at 5 and - at 6 How can I adress the anonlog inputs in MAD42. Could anyone help me, or maybe give me an example program? Thanks in advance ;)