Search the Community
Showing results for tags '1737-ie4c'.
Found 2 results
-
Need Help with 4 to 20 Signal Reading on 1734-IE4C
LuisGonzalez posted a topic in Allen Bradley / Rockwell Automation
Hello everyone, I'm currently facing an issue with a 4 to 20 signal reading on a 1734-IE4C, particularly with a 3-wire sensor (Seametric, S-Series). I've checked the sensor manual and noticed the following key points: The sensor power on the PLC is 5 - 24 VDC. The sensor power supply can provide at least 2 mA (100 mA is typical.) The sensor input on the PLC can accept a current-sinking device. This is my first experience with the 1734-IE4C, and while going through the manual, I couldn't find specific information about whether it accepts sinking devices. Additionally, I'm using the same power supply to energize both the sensor and the PLC. If anyone has experience with this module or any suggestions on how to troubleshoot an under-range alarm on the PLC, your insights would be greatly appreciated. Thank you in advance! sseries.pdf 1734-in032_-en-p.pdf -
1734-FPD needed between relay output module and analog input?
python01 posted a topic in Allen Bradley / Rockwell Automation
I am working on Remote IO panel and plan to use the following components: 1734-AENT 1734-OW4 - qty 2 1734-IE4C I wonder if I need to separate the bus between the relay output module and analog input module? Or anywhere else in this setup? Thanks.